Table of Contents
Advertisement
Thermal Receipt Printer
(2) Ethernet Port Connection (If you need to set the port to Ethernet)
a.
a. Get the IP address from the printer self-testing page:
According to above operation 8-a to print the self-testing page,
then you can get the current setting information.
And then, as is shown in the above picture, open the
"Properties" of printer Driver, select the "Port".
c.
c. Click "Next"
e. Select "Generic Network Card" and then click "Next"
10
b.
b. As shown in the above picture,
click "Add Port" and then click "New Port"
d.
d. Enter the IP address
e
f. Check the information and click "Finish"
f.
Advertisement
Table of Contents
