Table of Contents
Advertisement
Thermal Receipt Printer
* How to set up the Drive Port
(1) USB Port Connection (If you need you need to set the port to USB)
a.
a. Open "Printer Properties"：Begin→ Device and
printer→ Printer→ Printer Properties→ Port
c、
9
b.
b. Select USB port
If the computer has been connected to multiple
printers, there will be multiple USB ports, you can check
USB port as blew: Computer→ Properties→
Management→ Device Manager→ Universal Serial Bus
Controller→ Printer Support→ Properties→ Bus
relationship.
Alternatively, open the G80 Utility tool, view the USB
port, and select the USB port that is not occupied.
Notes: If USB00x can't be found, check whether "USB
Print Support" can be found under the Universal Serial
Bus Controller in device Manager of computer
properties. If it cannot be found, the USB connection
failed. Check the connection between printer and PC.
c. Print the test page works well, means that all Settings
are ok.
Notes: If "printer error", we should find the correct USB
port and test until ok.
Advertisement
Table of Contents
