Top Panel Descriptions; Bluetooth Mode; Aux Mode - Champion AST110 User Manual

Top Panel descriptions

Top Panel descriptions Top Panel descriptions Top Panel descriptions
1. Power ON/OFF
2. Play/Pause
3. Mode switching
4. EQ setting
Short click: Switch between 5
preset EQ effects
Click and hold: dismiss EQ
effect
5. Skip to Next Track
6. Skip to Previous Track
7. Increase Volume
8. Decease Volume
9. Indicator
Aux mode- the indicator will light up;
Bluetooth mode- the indicator keeps fl ashing
when unpaired; after a successful pairing, it
will stop blinking. The indicator will rapidly
fl ash When sets the volume to max or min
level.

Bluetooth mode

Bluetooth mode
1. Turn on the speaker and then switch to Bluetooth mode, keep the speaker and Bluetooth enabled
device within 10 meters or less of each other during paring process. Different environments may
affect the transmission distance;
2. Set your mobile phone or the Bluetooth enabled device to search for Bluetooth devices;
3. When the Bluetooth device fi nds the speaker, select "AST110" from the list of found devices; If r
equired, enter the password "0000". Select OK or YES to pair the two units;
4. After a successful pairing, the Indicator light will stop blinking with "plink" tone.

AUX mode

AUX mode
1. Keep the unit powered on. Plug one end of the 3.5 mm AUX cord to the headphone jack to your
device;
2. Plug the other end of the 3.5 mm AUX cord into the AUX jack on the speaker; It successfully joins
into the AUX Mode along with indicator lights up;
3. Use the connected device's audio controls for music playback.
Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources.
Makadamgatan 14 I 254 64 Helsingborg I Sweden
Designed in Sweden I Assembled in China
Champion ®
info@championnordic.se
EN