Important Precautions; Package Content; Installation; Back Panel Descriptions - Champion AST110 User Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

IMPORTANT PRECAUTIONS

IMPORTANT PRECAUTIONS
Please read and understand all the instructions before using the product. Damage caused by failure to
comply with the instructions will not be covered by the warranty.
EN
1.
Do not let the product and accessories get in contact with rain or water.
2.
Do not put any liquid containers, such as for example vases, next to the product.
3.
If the liquid fl ows inside the product, please immediately shut down the product and contact
customer service center.
4.
Do not place the products and accessories near fi re or other heat sources, including direct sunlight.
5.
In the case of lightning and thunder, the product should be shut down and unplugged from the power
source.
6.
Before the product is connected to a power supply socket, please ensure that the voltage of power
supply and products on the back or bottom printing values match. If the voltage is different, do not
connect the product to the power socket.
7.
Do not put this product or any other objects on the power line.
8.
If the temperature is under 5 ° C when this product is delivered or stored, please open the product
packaging and waiting for it to reach room temperature before use.
9.
Be careful of overheating. Be sure to set aside at least 4 inches of space around the product for
ventilation.
10.
Only use a micro fi ber cleaning cloth to clean the product.
11.
The product is made by recyclable and high quality materials. Do not dispose the product together
with other waste. Please follow the local conditions about collecting electronic, electrical products
and battery set. The correct disposal of these products will help to avoid a potentially negative impact
on the environment and human health.
12.
Only use the power supply that comes with the speaker, or equivalent type.

Package content

Package content
Package content
Package content
1xMain tower body
1xPower Adapter

Installation

Installation
1.
After all the screws are screwed in,
tighten them evenly clockwise to
avoid misplacement of the stand
and the base plate;
2.
Do not force excessively in case of
irreparable damage to the speaker
cabinet.

Back Panel descriptions

Back Panel descriptions
Back Panel descriptions
Back Panel descriptions
1.
Line in Jack
2.
USB charging for mobile device.
1xBase Plate
1xInstruction Manual
1x3.5mm AUX Cable
2xScrews and Washer

Advertisement

Table of Contents
loading

Table of Contents