ITech IT8500G+ Series User Manual page 34

RUN
RUNMODE
CHANNEL CHANNEL = 1
LINK
LINK
DEFAULT
DEFAULT
Default setting（> DEFAULT）
This option is used to restore all settings in the system menu to factory setting
values. Select YES, and press Enter to restore to factory setting values.
Otherwise, the original system menu settings will remain unchanged.
The factory system menu is as follows:
Power-on
Buzzer
Trigger
Memory
Power-on parameters（>Power-on）
When the power-on parameter is selected as Rst , the input state when the load
is powered on is the factory state. If Save 0 is selected, the input state at
power-on of the load is the value of SAVE 0.
Trigger mode selection（>Trigger）
When using the transient and list function, you need to use the electronic load
trigger function, you can choose Manual, External, Hold, or Bus as the trigger
mode. For the Manual option, the trigger signal is provided by composite keys
Keyboard sound settings (>Buzzer)
This item can set the key sound state. If in On mode, the electronic load will
issue beeper sound when you press any button. If in Off mode, the beeper will
not make a sound. The default set is in on mode.
PORT
NORMAL
BATTERY
PROG_TEST
OCP_TEST
OPP_TEST
OFF
SYNC
DUP
NO
YES
（Trigger）in front panel.
(Shift)+
Copyright © Itech Electronic Co., Ltd.
port number
Normal mode
Default in battery test mode at power on
Default in automatic test mode at power on
Default in OCP test mode at power on
Default in OPP test mode at power on
Turn off synchronization
Input On/Off and trigger function
synchronization.
Parameter setting (see the following chapters
for details), input On/Off and trigger function
synchronization.
Do not return instrument to factory default
settings.
Return instrument to factory default settings.
Rst
On
Manual
Group=0
Functions and Characteristics
Running mode at power on
Set the channel number:
1~16
Set up synchronization
operation
Factory default setting
25