Sidelooker Range Menu Item; Sidelooker Range Menu Item - Raymarine 465 Instruction Manual

Raymarine fishfinder instruction manual 465

Table of Contents

Press the > control until you see the Sidelooker Page. If you press

while the Sidelooker Page is visible, the unit will present the menu item

shown in Fig. 4-15.

Sidelooker Range Menu Item

Once the Sidelooker feature is turned on, the FishFinder uses two range

settings: one for the standard displays, and a second for just the Side-

looker feature. The menu item shown here sets the range for just the

Sidelooker. (This will not change the range setting for the other display pages.)

The range for the Sidelooker uses the Manual setting only. Use the < and

> controls to select the range you want to use.

Possible Sidelooker Range Settings:

In feet: 5, 10, 15, 20, 30, 40, 50, 60, 80, 100, 150

In meters: 2, 4, 6, 8, 10, 15, 20, 25, 30, 40, 50

If you are done with your setup changes, press the

back to the normal display. To select the next menu item, press the

arrow of the Page Control Pad.

Fig. 4-15

Sidelooker

Range

Menu Item

CLEAR

Setup Instructions

SETUP

button to go

Table of Contents