Table of Contents
Advertisement
Setup Menu for Window Page
You can choose some of the elements which are presented on the
Window Page. You will recall that you can step to this pages by using the
< or > controls on the Page Control Pad. See Fig. 3-3.
Normally, the displays follow in this order:
•
FishFinder Page (may include Zoom, A-Scope or Bottom Lock Mode)
>
•
Window Page
>
•
Full-screen Sidelooker Page (if Sidelooker feature is turned on)
>
•
Digital Page
When you are viewing the Window Page, press
present the setup menu shown in Fig. 4-14. The first five options (A
through E) will appear every time you see this menu. The last three items
(F through H) only appear when the optional Sidelooker feature is turned
on. We explained the choices in the material on the Window Page in
Section 3. (See page 40 and Fig. 3-8.)
To make a choice, use the < or > controls, then press
change. Notice that these options only control the information presented
on the left side of the display. In each case, the right side presents part
of the normal display. This will include the FishFinder Page, and may also
use the Zoom, A-Scope, or Bottom Lock Modes.
Notice that, whenever you use one of the last three options (F, G or H),
the Digital information disappears. All of the space on the left side of the
display is taken up by the Sidelooker Mode. See Fig. 4-20.
74
Fig. 4-14
Digital Setup
Menu Item
. The unit will
SETUP
to save the
CLEAR
Setup Instructions
Advertisement
Table of Contents
