2 Setting Up Tcp/Ip To Work With - Planex BLW-04EX User Manual

BLW-04EX
Setting Up TCP/IP to Workwith the BLW-04EX
5
2
Windows 95/98/ME
1. Click "Start/Settings/Control Panel."
2. Double-click the Network icon. Highlight the TCP/IP line that has been
assigned to your network card on the "Configuration" tab of the Network
window.
3. Click the "Properties" button.
4. You may dynamically assign TCP/IP address settings to a client, or you
can manual ly config ure a cl ient wi th address s et ti ngs t o meet your
specifi c net work requirement s. (Note t hat the default IP address of the
BLW-04EX is 192.168.1.1.)
55
Windows 2000
1 . Cl ick the "Start" butt on and choose "Setti ngs, " t hen cli ck "C ontrol
Panel."
2. Double click the "Network and Dial-up Connections" icon, then "Local
Area Co nnecti on " i con, an d press the "Propert ies" b utt on i n t he
"General" tab.
3. Select the TCP/IP line that has been assigned to your network card in the
"Local Area Connection Properties" window.
4. Click the "Properties" butt on to set the TCP/IP protocol for the BLW- 0 4 E X .
5. You can dynamically assign TCP/IP address settings to a client, or you
can manuall y co nfigure a cl ient wit h address sett ing s to m eet y our
specific network requirements. (Not e that the default IP address of the
BLW-04EX is 192.168.1.1.)
BLW-04EX
56