NetPing 2 IP PDU ETH 53R14 User Manual page 13

[ENG] NetPing 2 IP PDU ETH 53R14 & NetPing 2 IP PDU GSM3G 203R15, User guide -[ENG][2PWR] Features of Local Controls,
Element Description
GSM A socket for connecting an external GSM antenna. SMA with a connector. It is included only in the
antenna model NetPing 2 IP PDU GSM3G
connector
Link Ethernet LED.
• Glows if there is a link;
• Blinks when receiving packages.
CPU Operation LED.
• Glows continuously if a device is powered on;
• Blinks 5-6 times when a device is switched on (while a microprogram is loading);
• Blinks 15-20 times when resetting parameters of a device to default parameters;
• Blinks sometimes when a device sends packages to the Ethernet;
• Blinks intensely when shows a firmware update mode.
SIM card A slot to insert a SIM card of the format Mini-SIM. It is included only to the model
slot GSM3G 203R15, that has a built-in GSM modem.
Reset A Reset button to reset a device to default parameters (it is done when the Reset button is pressed
while a device is powered on). The external battery module should be switched off.
External A connector for NetPing external battery module 85m2.
battery
connector
Ethernet 2x10/100 BASE-TX, 2 ports are an uncontrolled switch of the 2nd level, and the third port of a
ports switch is connected to the CPU of the device.
203R15 , with a built-in GSM modem.
[ENG][2PWR] Features of Local Controls, LEDs, and Sockets on a Case of the Device
LEDs, and Sockets on a Case of the Device
NetPing 2 IP PDU
–