Sony UP-D711MD Manual page 16

Digital graphic printer
Hide thumbs Also See for UP-D711MD:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 16
Before operating the unit, please read this
manual thoroughly and retain it for future
reference.
Owner's Record
The model and serial numbers are located at
the rear. Record these numbers in the space
provided below. Refer to these numbers
whenever you call upon your Sony dealer
regarding this product.
Model No. ______________
Serial No. ______________
WARNING
To reduce the risk of fire or electric
shock, do not expose this
apparatus to rain or moisture.
To avoid electrical shock, do not
open the cabinet. Refer servicing to
qualified personnel only.
No modification of this equipment
is allowed.
Symbols on the products
Consult the Instructions for
Use
Follow the directions in the
Instructions for Use for parts of
the unit on which this mark
appears.
This symbol indicates the
manufacturer, and appears next
to the manufacturer's name and
address.
This symbol indicates the
European Community
representative, and appears next
to the European Community
representative's name and
address.
2
GB
For the customers in the U.S.A.
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide
reasonable protection against harmful
interference when the equipment is operated
in a commercial environment. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruction
manual, may cause harmful interference to
radio communications. Operation of this
equipment in a residential area is likely to
cause harmful interference in which case the
user will be required to correct the
interference at his own expense.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
All interface cables used to connect
peripherals must be shielded in order to
comply with the limits for a digital device
pursuant to Subpart B of Part 15 of FCC
Rules.
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions: (1) This device
may not cause harmful interference, and (2)
this device must accept any interference
received, including interference that may
cause undesired operation.
Caution
Federal law (United States of
America) restricts this device to
sale by or on the order of a
licensed healthcare practitioner.
For the customers in Canada
CAN ICES-3 (A)/NMB-3(A)
This unit has been certified according to
Standard CAN/CSA-C22.2 No.60601-1.
Important safeguards/notices for use
in the medical environments
1. All the equipments connected to this unit
shall be certified according to Standard
IEC60601-1, IEC60950-1, IEC60065 or

Advertisement

Table of Contents
loading

Table of Contents