Table of Contents
Advertisement
12
www.aeg.com
6.2 Setting the DURATION or
END
1. Set an oven function.
2. Press
display shows
or
flashes in the display.
3. Press
and press
For Duration
and then the hours, for End
set the hours and then the minutes.
An acoustic signal sounds for 2 minutes
after the time ends.
and time setting flash in the display. The
oven stops.
4. Press any button to stop the acoustic
signal.
5. Turn the knob for the oven functions
to the off position.
If you press
the hours for DURATION
setting of the END
function.
6.3 Setting the MINUTE
MINDER
1. Press
and "00" flash in the display.
2. Press
MINDER.
First you set the seconds, then the
minutes and then the hours.
7. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
7.1 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
again and again until the
or
.
or
to the set the values
to confirm.
first you set the minutes
or
symbol
when you set
, the appliance goes to
.
or
to set the MINUTE
At first, the time is calculated in
minutes and seconds. When the time
you set is longer than 60 minutes, the
symbol
The appliance now calculates the time in
hours and minutes.
3. The MINUTE MINDER starts
automatically after five seconds.
After 90% of the set time, an acoustic
signal sounds.
4. When the set time ends, an acoustic
signal sounds for two minutes.
first you
"00:00" and
Press any button to stop the acoustic
signal.
6.4 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on
immediately when the oven starts to
heat.
To reset the Count Up Timer, press and
hold
up again.
comes on in the display.
flash in the display.
If you set the MINUTE
MINDER when the
DURATION
or END
function operates, the
symbol
comes on in the
display.
and
. The timer starts to count
The Count Up Timer cannot
be used with the functions:
Duration
, End
.
Advertisement
Table of Contents
