Cleaning And Maintenance - Champion CHKB610 User Manual

Note: The coffee you get will less than the water you have added, as some water is absorbed by coffee
ground and adhere to the plastic.
9. When finish brewing, keep the coffee maker be energized if you do not want to serve immedi
ately, the coffee can be kept warm on the warming plate, and the coffee maker will shut off
automatically after about 40 minutes from the end of brewing process if it has not been ma
EN nually disconnected at the completion of brewing. For an optimum coffee taste, serve it just
after brewing.
Note: the insulation time error is 2 minutes.
10. Always turn the coffee maker off and disconnect the power supply when not use.
Note: Pay attention to pour the coffee out, otherwise you may be hurt as the temperature of coffee just finis-
hed is high.

Cleaning and maintenance

CAUTION: Be sure to unplug this appliance before cleaning. To protect against electrical shock, do not immerse
cord, plug or unit in water or liquid. After each use, always make sure plug is first removed from wall outlet.
1. Clean all detachable parts after each use in hot sudsy water.
2. Wipe the exterior surface of unit with a soft, damp cloth to remove stains.
3. Water droplets may buildup in the above area of the funnel and drip onto the product base
during brewing. To control the dripping, wipe off the area with a clean, dry cloth after each use.
4. Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaner to clean it.
5. Replace all parts and keep for next use.
Removing mineral deposits
To keep your coffee maker operating efficiently, periodically you should clean away the mineral deposits left by
the water according to the water quality in your area and the use frequency, we recommend removing mineral
deposits as follows:
1. Fill the water tank with water and descaler to the max level as indicated on the water level gau
ge (the scale of water and descaler is 4:1, the detail refers to the instruction of descaler. Please
use "household descaler", you may also use the citric acid instead of the descaler (the one
hundred parts of water and three parts of citric acid).
2. Insert the glass carafe onto the warming plate.
3. Make ensure filter (without coffee powder) and funnel are assembled in place.
4. Turn on the appliance and allow it to "brew" de-scaling solution by following the operation above.
5. After "brew" one-cup solution, switch off the appliance.
6. Leave the solution for 15 minutes and repeat step 3-5.
7. Turn on the appliance and run off the solution until the water tank is completely empty.
8. Rinse by operating the appliance with water at least 3 times.
3