Advertisement
3
1
2
B
A
Place tine B on the tine shaft to the right
of the gearbox. The stamped side of the
tine should face toward the gearbox.
Place a felt washer on the tine shaft.
Place the outer tine labeled A on the
right side of the tine shaft. The stamped
side should face toward tine B.
7
1
Unlatch the telescopic collar to adjust
the lower shaft to the preferred length.
Latch the collar back to lock the shaft
in place.
4
Insert the hitch pin into the holes
located on the side of the tine shaft.
8
7
2
1
2
3
Turn the handle adjustment knob
counterclockwise to release the knob.
Install the front handle.
5
Place tine C on the tine shaft to the
left of the gearbox. The stamped side
of the tine should face away from the
gearbox. Place a felt washer on the
tine shaft. Place the outer tine labeled
D on the left side of the tine shaft. The
stamped side should face away from
the gearbox.
9
1
3
2
Insert the handle adjustment knob back
in place. Turn the knob clockwise to
secure it in place.
D
C
2
1
1
2
9
Getting started
6
10
Advertisement
