2.0 Updates for Duo Control...............................................................................................................................3
3.0 Updates for iVan Control..............................................................................................................................4
4.0 Spare parts/ Service kits...............................................................................................................................6
+44 (0)2891 466 421 info@whalepumps.com www.whalepumps.com iVan model pictured 2020 Expanse Water Heater Models Update Contents Contents ..............................1 1.0 Application ............................2 2.0 Updates for Duo Control……………………………………………………………………………………………………………….3 3.0 Updates for iVan Control………………………………………………………………………………………………………………4 4.0 Spare parts/ Service kits……………………………………………………………………………………………………………….6 5.0 Contact details……………………………………………………………………………………………………………………………..8...
Duo Control Control Panel - x denotes packaging/shipping variations. A LIN controlled system will be easily identifiable by the change in the icons on Duo Control and iVan Control Panels. The icons below apply to both Control Panels. 2020 Onwards...
2.0 Updates for Duo Control Electrical Connections when fitted with Whale® Duo Control Panel With the LIN system, whereas previous connections at the Heater were via a wiring loom, the connections are now via a small communication PCB. Please refer to chapter 4.6 for a detailed view of how to replace the communication board.
3.0 Updates for iVan Control Electrical Connections when fitted with Whale® iVan Control Panel There is still a wireless communication PCB in use for connections to the Water Heater. Please refer to chapter 4.6 for a detailed view of how to replace the communication board.
Page 5
The pop-up screen identifies the fault. As soon as you have completed the suggested actions on the fault screens below, you must clear the fault code by following the instructions on screen and pressing Figure 13b – Fault display iVan Control Panel Fault...
When the check is complete, clear lockout by turning the Master Switch ‘off’ then ‘on’, then press OK on the iVan® Control Panel. An internal fault has occurred. Clear Internal faults lockout by turning the Master Switch ‘off’...
Need help?
Do you have a question about the iVan and is the answer not in the manual?
Questions and answers