Advertisement
Programming LED Lights
To access lighting and pump programming, tap PROGRAM
To program LED lights, tap
LIGHTS
To program Sunrise:
Use toggle to manually turn lights
1
On / Off.
To program Daylight:
6
Tap Daylight.
Base colors automatically adjust each
color level to match spectrum, allowing
you to "fine tune" the color using sliders
To program Sunset:
Tap Sunset.
9
Default Light Settings
Sunrise ON Time: 7:00 am
Sunrise Color Spectrum: B 50%, W 25%, R 45%, G 10%
Daylight Color Spectrum: B 90%, W 75%, R 85%, G 30%
Sunset OFF Time: 5:00 pm
Sunset Color Spectrum: B 75%, W 25%, R 65%, G 0%
Moonlight Duration: 2 Hours
Moonlight Color Spectrum: B 10%, W 0%, R 5%, G 0%
Weather Forecast: OFF
Custom Color Spectrum: B 50%, W 50%, R 50%, G 50%
2
Tap Sunrise.
3
Use scroll to select Sunrise ON time.
7
Use sliders to adjust color spectrum,
or select a base color at bottom.
10
Use scroll to select Sunset OFF time.
QUICK START
(Pre-programmed)
4
Use sliders to adjust color spectrum.
5
Tap
to go back, or
select another program at bottom.
8
Tap
to go back, or
select another program at bottom.
Color Spectrum Tips:
Daylight
For healthy coral growth and
color, keep Blue high (90%+),
White a bit lower (75%+)
Sunrise/Sunset
To enhance colors in fish & coral,
turn White low (<20%), Blue at
50-75%) and Red higher (65%+)
Moonlight
Turn White, Red, Green off (0%)
and keep Blue low (10%).
11
Use sliders to adjust color spectrum.
12
Tap
to go back, or
select another program at bottom.
Advertisement
