Ariston NIMBUS PLUS M NET Manual page 66

INTERNAL UNIT
Preinstallation
The indoor unit should be positioned in a compartment at
home (to avoid risk of freezing) ,in order to ensure the best
performance. Use the template provided and a spirit level
for positioning the system.
Minimum clearance
In order to allow the proper maintenance of the appliance,
you must observe the minimum clearances for installation
as shown in the figures below. To position the unit pro-
perly, use the template provided and a spirit level.
150
1. Fitting the tray and removing the front panel
Remove the screws (fig.1), pull the front in the direction of
the arrow and then inclinate and push up
Fix the metal bracket. This bracket is necessary for han-
ging the module to the wall. The module must be positio-
ned with the auxiliary of a spirit level.
66 / GB
150 500
(Fig. 1)
2. Safety valve drain
WH-L M 1 ZONE
safety valve
3 bar
WH M 1 ZONE
air purge
valve
safety valve 3 bar
air purge valve