Ariston NIMBUS PLUS M NET Manual page 54

SAFETY REGULATIONS
CAUTION
This manual constitutes an integral and essential
part of the product. It must be kept with care and
accompany the product at all times, whether in
case of transfer to a new owner / user or use on a
new application.
Read the information and warnings given in this manual
in full; they are essential to the safe installation, use
and maintenance of the product.
Do not use the product for any purpose other than
that specified in this manual. The manufacturer is not
liable for damage resulting from improper use of the
product or failure to install it as instructed herein.
All routine and extraordinary maintenance must be
done exclusively by qualified staff using solely original
spare parts. The manufacturer is not liable for damage
resulting
Key to symbols:
Failure to comply with this warning implies the
risk of personal injury, in some circumstances
even fatal.
Failure to comply with this warning may result in
serious damage to property, plants or animals.
The manufacturer is not liable for damage resul-
ting from improper use of the product or failure
to install it as instructed herein.
Install the appliance on a solid basement which
is not subject to vibration.
Noisiness during operation.
When drilling holes in the wall for installation
purposes, take care not to damage any electri-
cal wiring or existing piping.
Electrocution caused by contact with live wires.
Damage to existing installations.
Flooding caused by water leaking from da-
maged pipes.
Perform all electrical connections using wires
which have a suitable section. La connessione
elettrica del prodotto deve essere effettuata
seguendo le istruzioni fornite nel relative para-
grafo.
54 / GB
Fire caused by overheating due to electrical cur-
rent passing through undersized cables.
Protect all connection pipes and wires in order
to prevent them from being damaged.
Electrocution caused by contact with live wires.
Flooding caused by water leaking from dama-
ged piping.
Make sure the installation site and any systems
to which the appliance must be connected
comply with the applicable norms in force.
Electrocution caused by contact with live wires
which have been installed incorrectly.
Damage to the appliance caused by improper
operating conditions.
Use suitable manual tools and equipment
(make sure in particular that the tool is not
worn out and that its handle is fi xed properly);
use them correctly and make sure they do not
fall from a height. Replace them once you have
fi nished using them.
Personal injury from the falling splinters or frag-
ments, inhalation of dust, shocks, cuts, pricks
and abrasions.
Damage to the appliance or surrounding objects
caused by falling splinters, knocks and incisions.
Use electrical equipment suitable for its inten-
ded use (in particular, make sure that the power
supply cable and plug are intact and that the
parts featuring rotary or reciprocating motions
are fastened correctly); use this equipment cor-
rectly; do not obstruct passageways with the
power supply cable, make sure no equipment
could fall from a height. Disconnect it and re-
place it safely after use.
Personal injury caused by falling splinters or frag-
ments, inhalation of dust, knocks, cuts, puncture
wounds, abrasions, noise and vibration.
Damage to the appliance or surrounding objects
caused by falling splinters, knocks and incisions.
Make sure any portable ladders are positioned
securely, that they are suitably strong and that
the steps are intact and not slippery and do not
wobble when someone climbs them. Ensure
someone provides supervision at all times.
Personal injury caused by falling from a height or
cuts (stepladders shutting accidentally).