Table of Contents
Advertisement
General Info.
Getting Started
Operation
Printing a Card
Cleaning
Troubleshooting
Specifications
Appendix A
Appendix B
Appendix C
37
A
- MEDIA LOADING ORIENTATION
STRIPE
DOWN
STRIPE
UP
NOTE:
M1 = Stripe Down HICO
M2 = Stripe Down LOCO
Approved HICO & LOCO PVC Cards are available. (See Appendix C).
P75i
User's Manual
The magnetic encoder is a factory installed
item with the read/write head positioned
below the card path, available with HICO
encoding (P75i CM1 or P75i CEM1) or LOCO
encoding (P75i CM2 or P75i CEM2).
When loading cards into the Card Cartridge,
please ensure that the magnetic stripe is
facing down and closest to the rear.
Also available are Printer models with the
Magnetic Read/Write head positioned above
the card path, with HICO encoding (P75i CM3
or P75i CEM3) or LOCO encoding (P75i CM4 or
P75i CEM4).
When loading cards, please ensure that the
magnetic stripe is facing up and closest to the
rear.
M3 = Stripe up HICO
M4 = Stripe up LOCO
ONLY USE cards that comply with ISO 7810 &
7811 standards for magnetic stripe cards. The
magnetic stripe must be flush to the surface of
the card to work properly. Never use taped-on
magnetic stripes.
Advertisement
Table of Contents
