S-Bracket Connector: Jsp1 - MSI 845PE Neo Series Manual

S-Bracket Connector: JSP1

The connector allows you to connect a S-Bracket for Sony & Philips
Digital Interface (SPDIF). The S-Bracket offers 2 SPDIF jacks for digital
audio transmission (one for optical fiber connection and the other for coaxial),
and 2 analog Line-Out jacks for 4-channel audio output.
To attach the fiber-optic cable to optical SPDIF jack, you need to remove
the plug from the jack first. The two SPDIF jacks support SPDIF output only.
For more information on the S-Bracket, refer to Appendix A: Using 2-, 4- or 6-
Channel Audio Function.
PIN SIGNAL
1 VC C5
3 SPD FO
5 GN D
7 LFE-OUT
9 CET-OU T
11 GN D
Optional S-Bracket
Connect to JSP1
SPDIF jack (optical)
11
12
JSP1
JSP1 Pin Definition
DESCRIPTION PIN
VCC 5V 2
S/PDIF output 4
Ground 6
Audio bass output 8
Audio center output 10
Ground 12
SPDIF jack (coaxial)
1
2
SIGNAL DESCRIPTION
VD D3 VDD 3.3V
(No Pin) Key
SPD FI S/PDIF input
SOUT-R Audio right surrounding output
SOU T-L Audio left surrounding output
GN D Ground
Analog Line-Out jack
Hardware Setup
2-19