Table of Contents
Advertisement
MS-6580 ATX Mainboard
Option 2: 6CH+SPDIF (coaxial) with S-Bracket
S-Bracket is an optional accessory. It gives access to analog and digital
audio output by integrating both SPDIF (Sony & Philips Digital Interface) and
analog LINE OUT connectors. To use the S-Bracket, you should select correct
setting in the software utility. For information about the setting, refer to Select-
ing 2-, 4- or 6-Channel Setting later in the section.
Connector configurations for 2-, 4- and 6-channel using S-Bracket are
described below:
2-Channel Analog Audio Output
We recommend that you should still attach the speakers to BACK
PANEL's Line Out connector during 2-channel audio mode even though S-
Bracket's Line Out connectors function properly.
1
Line In
2
Line Out (Front channels)
3
MIC
4
SPDIF Coaxial jack
A-16
4
Back Panel
1
2
3
Advertisement
Table of Contents
