MSI 845PE Neo Series Manual page 65

tions for a longer time and thus improve the effective PCI bandwidth. For better
PCI performance, you should set the item to higher values. Settings range from
32 to 248 at a 32 increment.
Init. Graphics Adaptor Priority
This setting specifies which VGA card is your primary graphics adapter. Set-
ting options are:
PCI/AGP
AGP/PCI
PCI IDE BusMaster
Set this option to Enabled to specify that the IDE controller on the PCI local
bus has bus mastering capability. Settings options: Disabled, Enabled.
PCI Slot 1/6, 2/5, 3, 4 IRQ Priority
These items specify the IRQ line for each PCI slot. Setting options: 3, 4, 5, 7,
9, 10, 11, Auto. Selecting Auto allows BIOS to automatically determine the
IRQ line for each PCI slot.
Set IRQs to PCI or ISA
Press <Enter> to enter the sub-menu and the following screen appears:
The system initializes the installed PCI VGA card
first. If the PCI VGA card is not available, it will
initialize the AGP card.
The system initializes the installed AGP card
first. If the AGP card is not available, it will
initialize the PCI VGA card.
BIOS Setup
3-21