OPERATION
reverse gear box. Make sure the shift lever can be on the three positions (F, N, R) cleanly. Then tighten
the nuts 1, 2.
F. Parking Adjustment
a.
Press down the reverse lever to the "F"
position so that the unit can move forward, pull
back the lever to "P" so that the unit can Parking.
(See Fig. 6 )
b. Adjust Nut #1 on the top of the reverse cable
can adjust the mesh status inside reverse gear
box, Turn half a round as you rotate the nut to
adjust the cable. Make sure cable is not too tight or
loose. Adjust Nut #2 accordingly to adjustment of
Nut #1.
Figure 6