IS YOUR VEHICLE READY TO DRIVE
■
Pre-drive Inspection
■
Underbody & Exhaust System
Check for and remove any dirt, vegetation or other debris that could be fire hazard or interfere with
the proper operation of the Go-Kart.
■
Air Cleaner Housing Drain Tube
Check for deposits in the drain tube. If necessary, clean the tube and check the air cleaner housing.
■
Leaks, Loose Parts
Walk around you Go-Kart and look for anything that appears unusual, such as a leak or loose cable.
■
Lights
Make sure the headlight, brake light and tail light are working properly.
■
Throttle
Check the free play and adjust if needed. Press the throttle to make sure it moves smoothly without
sticking, and snaps back automatically when it is released.
■
Brakes
Press the rear brake pedal several times, check for proper brake pedal free play. Make sure there is
no brake fluid leakage.
■
Engine Stop Button
When engine is running, press and hold the Engine Stop Button for two seconds. Make sure engine
stops.
■
Steering Wheel
Check that the wheels turn properly as you turn the steering wheel.
■
Cable
Check the cable housing for wear. Check the fittings for looseness. Replace or tighten as needed.
■
Tie rod
Check the tie rod housing for wear. Check the fittings for looseness. Replace or tighten as needed.