Intended Use - Bosch ErgoMixx Style MSM6S Series Instruction Manual

Intended use

This accessory is designed for the hand blender MSM6S... .
Follow the operating instructions for the hand blender.
Never use the accessory for other appliances. Only use matching
parts together.
Depending on assembly, this accessory is suitable for the following
purposes:
Universal blade: For mincing, pureeing, blending, kneading, cutting
and for making sauces and mixed drinks.
Cutting attachments: For shredding, grating and cutting food.
Food which is to be processed must not contain any hard
components (e.g. bones). The accessory must not be used for
processing other objects or substances.
Safety tips
W Risk of injury
■ Never reach into the feed chute. Only use the pusher provided!
■ Do not touch the blades of the universal cutter with bare hands.
To insert and remove the universal blade, grasp by the plastic
only. Clean with a brush.
■ Never grasp the sharp blades or edges of the cutter attachments.
Take hold of them by the edge only! Note the shape and location
when inserting in the carrier disc. Clean with a brush.
■ Take hold of carrier disc by the designated recessed grips only.
■ The accessory must be completely assembled before use. The
accessory should only be used in the intended operating position.
Before attaching or removing the accessory, always wait until
the drive has come to a standstill and pull out the mains plug.
■ When working with the multifunction accessory, the base unit
should be switched on only when the gear attachment has been
fitted and is screwed on tight.
W Caution!
■ Never immerse the gear attachment in liquids or hold under
running water and do not clean in the dishwasher.
■ The container is not microwave-safe.
■ Always observe the maximum filling level.
■ Check that there are no foreign objects in the feed chute or
container. Do not insert objects (e.g. knives, spoons) into the
feed chute or container.
■ Never use the hand blender (blender foot) in the container.
Intended use en
3