After Sales Service - universalblue UBHC3-18 Instruction Manual

• When transporting, place the product parallel to the ground, with
the upper part facing up.
• When transporting,
cardboard, aligned with the wire
rack and the baking sheet, on the
inside of the oven door to make
sure they do not damage the oven
door. Cover the oven door with the
side walls.
• Do not use the door or handle to
transport or move the product.
(See. Figure 16)
11.

AFTER SALES SERVICE

Before contacting the after-sales service, please, spend a few
minutes reviewing the following notes with some of the problems
that may arise and their possible solution.
If you can not find a solution to the problem found, please contact
the technical service of the device.
The oven does not heat
• Function and/or temperature button might not be adjusted. Use
the function and/or temperature button to set a function and
temperature.
• For models with a clock/timer, oven time might not be set. Set
the time.
• There might be no power. Check if there is power in your house
and check the fuses in the fuse box. If necessary, replace the
fuses and enable them again.
place a
Figure 16
66