Oven Transportation - universalblue UBHC3-18 Instruction Manual

Before carrying out this procedure, make sure that the product is not
supplied with electricity.
• The oven lamp must have the following specifications:
o Heat resistance up to 300ºC,
o Power settings: 220-240V ~ 50Hz,
o Power: 15 W
• The lighting lamp inside the oven should be replaced as shown in
Figure 15.
• Turn the outer glass of the body (A) counterclockwise to remove
it,
• Remove the oven lamp by turning it counterclockwise or pulling it
toward you, depending on the type of lamp.
• Place the new lamp,
• Reinstall the exterior glass of the body,
10.

OVEN TRANSPORTATION

If you wish to transport the oven, please bear in mind the following
notes:
• Save the original packaging. Transport the product in its original
packaging and follow the instructions on the packaging.
• If you do not have the original packaging, take the necessary
measures so that the external surfaces of your product are not
damaged. Do not place heavy loads on the product.
Figure 15
65