universalblue UBHC3-18 Instruction Manual page 58

If you want the oven to finish baking at a certain time, you can set
the switch-off time. This process is called semiautomatic cooking.
• Press Button 1 until "dur" and "0.00" begin to flash in the display.
The automatic bake icon will also blink.
• Use buttons 2 and 3 to set the baking time. The cooking time can
be set from 1 minute to 10 hours.
• Around 7 seconds after the time has been set, the display will
change to time display. The automatic baking icon will remain on
the screen.
• Select the required function of heat and temperature.
• When cooking is finished, an alarm will sound for approximately 7
minutes and the automatic bake icon will begin to flash again.
Place the control and thermostat buttons in the off position.
Press Button 1, 2 or 3 to stop the alarm and switch to manual
operation.
Schedule start time
If you want to cook in the oven after a certain time and then finish it,
you can set the start and end time of the bake. This process is
called fully automatic baking. In this case you would have to
program the duration of the baking and then the time of completion
of the baking. The oven will automatically calculate when it should
start up.
• Press Button 1 until "dur" and "0.00" begin to flash in the digits.
The auto-bake icon will also flash (for example, at 5:30 p.m.).
• Use buttons 2 and 3 to set the baking time from 1 minute to 10
hours (for example, 1 hour).
• Press Button 1 until "End" and "18.30" begin to flash in the digits.
• Use buttons 2 and 3 to set the bake completion time. The time of
completion of baking can be set 23 hours and 59 minutes later
(for example, 19:30).
• Select the required heat and oven function.
• The bake icon will disappear. The oven will not start baking until
the start time (6:30 in this example), which is equal to the
difference between the end time and the cooking time.
58