Installing The Switch - Planet GSW-1601 User Manual

Lights to indicate the link through that port is
LNK/ACT Green
successfully established.
Blinks to indicate that the switch is actively sending or
receiving data over that port.
Lights to indicate that the port is operating at
1000 Green
1000Mbps.
Lights to indicate that the port is operating at 100Mbps.
100 Green
2.1.4 Switch Rear Panel
Figure 2-3 & 2-4 shows a rear panel of GSW-2401/GSW-1601.
Figure 2-3 GSW-2401 front panel
Figure 2-4 GSW-1601 front panel
Power Notice:
1. The device is a power-required device, it means, it will not work
till it is powered. If your networks should active all the time, please
consider using UPS (Uninterrupted Power Supply) for your device.
It will prevent you from network data loss or network downtime.
2. In some area, installing a surge suppression device may also
help to protect your switch from being damaged by unregulated
surge or current to the Switch or the power adapter.

2.2 Installing the Switch

This part describes how to install your Gigabit Ethernet Switch and
make connections to it. Please read the following topics and perform
the procedures in the order being presented.
100 ~ 240V AC
50/60 Hz
100 ~ 240V AC
50/60 Hz