Operating Modes - Wolf SM2 Installation And Operating Instructions Manual

3062438_0309

Operating modes

b) SM2 (stand alone) with BM-Solar programming module
The module will be controlled by the BM-Solar programming
module.
The BM-Solar can be clicked into the SM2 solar module or
can be used as a remote control on a wall mounting base
(accessory).
c) SM2 (stand alone) without programming module
The solar module is operated without programming module.
Operation and selecting values is then not possible.
The status of outputs and faults can be identifi ed by the LEDs
in the enclosure front.
SM2 BM-Solar BM-Solar BM-Solar
9