Table of Contents
Advertisement
b. Remove the old battery from its socket.
6. Insert the new battery with the positive polarity (+ side) facing up, and make sure that it
is seated completely.
7. Observe this post-configuration procedure.
a. Make sure all components are installed according to the described step-by-step
instructions.
b. Make sure that no loose tools or parts are left inside the computer.
c. Reinstall any expansion boards, peripherals, board covers, and system cables that have
previously been removed.
d. Reinstall the side cover.
e. Connect all external cables and the AC power cord to the computer.
f. Press the power switch to turn on the computer.
8. Reconfigure the BIOS settings.
Replacing the battery results in all BIOS settings returning to their default settings.
IMPORTANT
BIOS settings other than default must be reconfigured after replacing the battery.
This product contains a hermetically-sealed lithium battery that may need to be replaced
during the life of the product.
At the end of its life, the battery contained in this product should be collected separately from
any unsorted municipal waste.
Rockwell Automation Publication 6177R-IN001G-EN-P - July 2013
Industrial Non-display Computers 19
Advertisement
Table of Contents
