Advertisement
Quick Links
Installation Instruction
CPTAC Power Board Knob
Replacement
Models KIT09667 and BRD03075
Used on PTED and PTHD Unit
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of
heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury.
When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are
attached to the equipment.
August 2020
SAFETY WARNING
PART-SVN85C-EN
Advertisement
Related Manuals for Trane KIT09667
Summary of Contents for Trane KIT09667
- Page 1 Installation Instruction CPTAC Power Board Knob Replacement Models KIT09667 and BRD03075 Used on PTED and PTHD Unit SAFETY WARNING Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
-
Page 2: Warnings, Cautions, And Notices
CFCs and HCFCs such as saturated or unsaturated HFCs and HCFCs. Important Responsible Refrigerant Practices Trane believes that responsible refrigerant practices are important to the environment, our customers, and the air conditioning industry. All technicians who handle refrigerants must be certified according to local rules. -
Page 3: Revision History
Non-Trane personnel should always follow local regulations. Copyright This document and the information in it are the property of Trane, and may not be used or reproduced in whole or in part without written permission. Trane reserves the right to revise this publication at any time, and to make changes to its content without obligation to notify any person of such revision or change. -
Page 4: Kit Contents
Kit Contents There are two knobs for the PTED and PTHD power board included with the KIT09667. This kit also ships with the replacement Power Board. Knob Installation When replacing a control panel knob or the power board on a PTAC remove both knobs currently on the control panel and replace both with the two knobs contained in KIT09667. - Page 6 For more information, please visit trane.com or tranetechnologies.com. Trane has a policy of continuous product and product data improvement and reserves the right to change design and specifications without notice. We are committed to using environmentally conscious print practices.