Sd Card Format - Racelogic RLPBT-V1 Quick Start Manual

recording even if the car is stationary. Always check the
Record Icon to make sure the box is not recording
before you eject the card.
IMPORTANT
The SD card should not be removed when
the Record Icon flashes red as it may cause you to
lose data.
Note: If the SD card is removed while the box is still
recording, you may need to repair it on a PC before you
can use it again.

SD Card Format

Performance Box Touch is supplied with an 8 GB SDHC card in a FAT32 file format, which is the only file format it
supports.
If you are looking to purchase a new SD card, we recommend that any card you use has a write speed of above 7
MB/s (4 MB/s is the absolute minimum) and a speed class of 10 (4 is the absolute minimum). We recommend that
you use SD cards from quality brands such as Transcend, SanDisk, Kingston or Lexar to ensure the best results.
IMPORTANT
If you have an SD card that is formatted in the exFAT or NTFS file formats, you will have to reformat it to a
FAT32 file system before it will work with a Performance Box Touch unit.
SDHC cards (2 GB to 32 GB)
Supplied or purchased SDHC cards are formatted in the FAT32 file format. This format
supported by Performance Box Touch.
SDXC cards (64 GB and above)
Purchased SDXC cards will be formatted in exFAT or NTFS file formats; these formats
Performance Box Touch. Please reformat as per the instructions below.
https://en.racelogic.support//Product_Info/Performance_Meters/Performance_Box_Touch_New/Performance_Box_Touch_V1/
Quick_Start_Guide_%E2%80%93_Performance_Box_Touch_V1/Quick_Start_Guide%3A_Accel_Mode_-
is
are not supported by
_Performance_Box_Touch_V1
5