Table of Contents
Advertisement
13.1.3. Bias Frequency Adjustment (Deck 1/2)
1. Set the unit to "AUX" position.
2. Insert the Normal blank tape (QZZCRA) into DECK 2 and set the unit to
"REC" mode (
3. Adjust L1002 so that the output frequency is within the standard value
as below.
Standard Value: 89 ~
110 kHz
13.1.3.1. Cassette Deck Section
Below is the locations of test points for Deck P.C.B.:-
13.2. Tuner Section
This section include details on the alignment of AM-IF and AM RF adjustment.
13.2.1. AM-IF Alignment
1. Set up the equipments as shown in Fig. 5.
use "REC/STOP" key).
Fig. 4
66
Advertisement
Table of Contents
