Table of Contents
Advertisement
Condition
Open current playing tray
Open All
Stock
Play
Play & Open Tray-*
Change
Close All
6.1.4. New CD Mechanism (CRS1)
Note:
This service manual does not contain the following information for the mention CD Mechanism drive:
- Schematic Diagram, Block Diagram and P.C.B. layout of CD Loading
P.C.B.
- Part List for individual parts of the mechanism.
- Exploded View and Parts List for individual parts of the CD Mechanism
drive.
Please refer to the original service manual (Order No. MD0509368C0) for the CD Mechanism Drive CRS1.
6.2. Music Port
The state to change current playing disc. All tray will be open at once and
current tray at PLAY position will be expose.
The state where all trays being driven to OPEN position. The disc can be taken
in or out from tray to tray by close tray one by one from top to bottom.
The state where the trays are stored in STOCK position
The state where one of the tray 5 trays is being driven to PLAY position and
clamped by traverse unit
The state where one of the tray is in playing position performing recording or
reproducing, other trays can be used (OPEN position) for disc exchanging
without stopping the recording or reproducing process.
The state when one of the opened tray being driven from OPEN position to
STOCK position and other opened trays remain still at OPEN position.
The state where all open trays will being driven from OPEN position to STOCK
position, one by one from top to bottom
15
Explanation
Advertisement
Table of Contents
