Panasonic SA-AK640E Service Manual page 24

Error Code Diagnosis
Contents
ICSL Cam gear/gear
units abnormal
ISTK Drive rack/gear
assembly
abnormal
IPLY Drive rack/gear
assembly
abnormal
ITOP UD assembly
IUDS UD assembly
HOME Cam gear/gear
assembly
abnormal
LOAD Tray drive
assembly
abnormal
Description of
error
Cam gear does
not rotate to
"PLAY" driving
position and
hence does not
drive playing tray
to "STOCK"
position.
The tray drive
rack does not
move to "STOCK"
position. (Tray
does not move to
"STOCK"
position)
The tray drive
rack does not
move to "PLAY"
position. (Tray
does not move to
"PLAY" position)
UD Rack does not
move to front
direction. This
lead to UD base
not raise to top
position.
After TOP SW is
detected, UD rack
does not move
into tray 1
position.
Cam gear does
not move to
"HOME" position
under following
conditions
1. After tray is load to
"PLAY" position.
2. After tray is unload to
"STOCK" position.
Tray unit does not
move from
"STOCK" to
"PLAY" position
24
Automatic FL Display Remarks
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.