Panasonic SA-AK640E Service Manual page 25

Error Code Diagnosis
Contents
PDRV Cam gear/gear
assembly
abnormal
UDU UD base
asssembly
abnormal
UDD UD base
asssembly
abnormal
UD1 UD base
asssembly
abnormal
F1NG Fail - safe
mode. (For open
/close tray
unit(s))
F2NG Fail - safe
mode. (For open
/close tray
unit(s))
Description of
error
Cam gear does
not move from
"HOME" to
"PLAY" drive
position.
UD Base
assembly does
not move
upwards from
tray 5 to tray 2
UD Base
assembly does
not move
downwards from
tray 1 to tray 5.
UD Base
assembly does
not move to tray 1.
When the tray
open operation is
performed, it fails
to open. It will
automatically
close all trays
after the time-out
by the
microprocessor.
During this time
when it fails, the
error code will
appear.
When the tray
close operation is
performed, it fails
to close. It will
automatically
open all trays
after the time-out
by the
microprocessor.
During this time
when it fails, the
error code will
appear.
25
Automatic FL Display Remarks
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.
For CD changer unit (CRS1).
Press [SINGLE CHANGE] on
main unit for next error.