Standard Fittings; Location For Installation - Gree GMV-ND22ZA/A-T Owner's Manual

Multi Variable Air Conditioners Concealed Floor Standing Unit

3.1 Standard Fittings

Please use the supplied standard fittings listed below as instructed.
No. Name
1 Wired Controller
2 Special Nut
3 M10×8 Nut with Washer
4 M10 Nut (M10×8.4 Nut)
M10 Washer (Spring
5
Washer M10×2.6)
6 Insulation
7 Insulation
8 Plastic clamp
9 Fastener
10 Supporter(120mm)
11 Resultant screw bolt
12 Corrugated pipe
13 Filter element
NOTES!
① User can purchase remote controller and receiver otherwise by himself.
② The height of ex-factory supporter is 120mm. If user wants to increase or decrease unit
installation height, please purchase the supporter of different height. Other height of supporter
is 80mm, or 160mm.
③ For unit accessories, please refer to the indoor unit packing list, which is subject to change
without prior notice.

3.2 Location for Installation

(1) The appliance shall not be installed in the laundry.
(2) The location should be able to withstand the weight of unit.
(3) The ground for installing unit shall not be slant apparently.
(4) Drain pipe can drain water out easily.
(5) There is no obstacle at inlet or outlet. Please ensure good air circulation.
Appearance
4
Q'ty
1 pc. To control the indoor unit
1
GMV-ND22～45ZA/A-T:2 pcs.
pc.or
GMV-ND56～71ZA/A-T:1 pc.
2 pcs.
To be used together with the hanger
4 pcs.
bolt for installing the unit.
To be used together with the hanger
4 pcs.
bolt for installing the unit.
To be used together with the hanger
4 pcs.
bolt for installing the unit.
1 pc. To insulate the gas pipe
1 pc. To insulate the liquid pipe
2 pcs. To lead the wire
8 pcs. To fasten the sponge
2 pcs. To fix the indoor unit
Assembly parts of Supporter to fix the
4 pcs.
indoor unit
GMV-ND22～45ZA/A-T：0 pc.
0 or 1
pc. GMV-ND56～71ZA/A-T：1 pc.
1
To be used the return air filter
sheet
Usage