Preparations For Installation; Standard Fittings - Gree GMV-ND18PHS/A-T Owner's Manual

3 Preparations for Installation

NOTICE! Product graphics are only for reference. Please refer to actual products. Unspecified
measure unit is mm(in.)

3.1 Standard Fittings

Please use the supplied standard fittings listed below as instructed.
No. Name
1 Wired Controller
2 Drain Hose Assembly
3 Special Nut
4 M10X8 Nut with Washer
5 M10 Nut (M10X8.4 Nut)
M10 Washer (Spring
6
Washer M10X2.6)
7 Insulation
8 Insulation
9 Fastener
10 Hanger
11 Nut with Washer
paper pattern for
12
installation
Multi Variable Air Conditioners Ducted Type Indoor Unit
Appearance Q'ty
or
3
Usage
1 To control the indoor unit
To connect with the hard PVC
1
drain pipe
To be used for connecting the
1
refrigerant pipe
To be used together with the
4
hanger bolt for installing the unit.
To be used together with the
4
hanger bolt for installing the unit.
To be used together with the
4
hanger bolt for installing the unit.
1 To insulate the gas pipe
1 To insulate the liquid pipe
8 To fasten the sponge
4 To fix the indoor unit
To fix the hook on the cabinet of
8
the unit.
1 Locate the drill hole on ceiling