Preparations For Installation; Standard Fittings - Gree Fresh Air Series Owner's Manual

Note: The ex-factory set temperature is 18℃ in cooling mode and 22℃ in heating mode. If
the user needs to change the temperature setting, please contact after-sales service personnel.

3 Preparations for Installation

Note: Product graphics are only for reference. Please refer to actual products. Unspecified
measure unit is mm.

3.1 Standard Fittings

Please use the supplied standard fittings listed below as instructed.
No. Name
1 Wired Controller
2 Union Nut Sub-assy
3 Corrugated pipe
M10 Nut (Nut with Washer
4
M10×8)
5 M10 Nut (M10×8.4)
M10 Washer
6
(Spring Washer M10×2.6)
M10 Washer
7*
(M10×Φ30×2.5)
8 Insulation
9 Insulation
10 Fastener
11* Hanger
12* M8 Nut (M8×6.8)
M8 Washer
13*
(Spring Washer M8×2.1)
M8 Washer
14*
(M8×Φ16×1.5)
15 Sponge of Drain Pipe
Note:
No.7*, 11*~14* is only suitable to GMV-NDX224~280P/A-T.
①
The packed attachments should be subject to actual objects. If there are any alterations, there
②
will be no further notice.
Multi Variable Air Conditioners Fresh Air Series Indoor Unit
Graphics Quantity
1PC
1 Set
4 PC
4/8 PC
4 PC
4 PC
1 PC
1 PC
8 PC
4 PC
8 PC
8 PC
8 PC
2 PC
6
To control the indoor unit
To be used for connecting the
refrigerant pipe
1 GMV-NDX125~140P/A-T
To be used together with the hanger
bolt for installing the unit.
To be used together with the hanger
bolt for installing the unit.
GMV-NDX125~140P/A-T: 4
GMV-NDX224~280P/A-T: 8
To be used together with the hanger
bolt for installing the unit.
To be used together with the hanger
bolt for installing the unit.
To insulate the gas pipe
To insulate the liquid pipe
To fasten the sponge
To fix the indoor unit
To fix the hook on the cabinet of the
unit.
To fix the hook on the cabinet of the
unit.
To fix the hook on the cabinet of the
unit.
Wrap the joint of drain pipe
Function