Mounting To Rack (Pn260893H-Nz Only) - Panasonic GA-MLi8TPoE+ Installation Manual

3 Installation and Configuration

3.3 Mounting to rack (PN260893H-NZ only)

Use the two 19-inch rack mount brackets and eight screws (for fixing the rack mount
brackets to the Ethernet Switch) supplied with the mount brackets to fix the mount brackets
to the four holes on each side of the Ethernet Switch.
Then securely install the Ethernet Switch onto the rack using the four screws (for a 19-inch
rack mount) supplied with the mount brackets or the screws supplied with the rack.
Up to two Ethernet Switches can be connected. When connecting two Ethernet Switches
and installing them onto a rack, use the two 19-inch rack mount brackets and eight screws
(for fixing the rack mount brackets to the Ethernet Switch) supplied with the mount brackets
to fix the mount brackets to the four holes on one side of the Ethernet Switches.
Then use the two connection brackets and eight screws (for fixing the connection brackets)
supplied with the mount brackets to securely fix the connection brackets to the connection
screw holes on the front and back panels, and then install the Ethernet Switches onto the
rack.
Right side
Left side
Front
Connection screw hole
 Installation on a rack (one unit)
 Installation on a rack (two units connected)
19-inch rack mount brackets
20
Screw holes for fixing the 19-inch rack mount brackets
19-inch rack mount brackets
Connection brackets
AC100-240V
Connection screw hole
19-inch rack mount brackets
Back
Front
Front
Back