Related Manuals for Ferno ITC-HL
Summary of Contents for Ferno ITC-HL
- Page 1 User and maintenance manual ITC-HL Locking system for incubator Read this manual Rel.260717 English carefully and keep it for future reference...
-
Page 2: Ferno Technical Support
It is prohibited to reproduce this recommended that staff be trained in its correct usage. Retain this manual, either in full or in part, without the prior consent of Ferno manual for future reference. In case of change of ownership, ensure Washington Italia s.r.l. -
Page 3: Safety Information
Non-original spare parts and inadequate repairs may cause damage device's labels are defined below. The CE mark is present and/or injury. Use only original Ferno parts and refer exclusively to Ferno Washington Italia Customer Support. on the locking device and in this manual. - Page 4 Carefully read and follow the instructions for use; replace any damaged or worn label immediately. To obtain replacement labels, contact Ferno Washington Italia's Customer Service. The ITC-HL system is identified by the Part Number (PN) and by the Serial Number (SN) permanently printed on the label applied to the product.
-
Page 5: Technical Data
Technical Data The following figures are rounded off to the nearest whole number. For further details, please contact Ferno Washington Italia Customer Service. Ferno reserves the right to change the specifications without notice. Size without incubator: Length 120 cm... - Page 6 ITC-HL locking system The ITC-HL locking system, in the available configurations, The ITC-HL device is a locking system for incubators to be is designed only for use with stretchers and transporters installed on the main frame of the stretchers. It is supplied in listed in section "General information".
-
Page 7: Installation
LIFTING HANDLES WARNING Follow this assembly diagram to ensure interchangeability between the different FERNO stretchers. Anchoring systems/blocks must be assembled only by trained and qualified operators. All screws must also be tightened correctly, with the threaded part smeared with medium type threadlocker. -
Page 8: Assembly Details
ITC-HL frame. Figure 1: Assembly of plastic spacer (code 2042729). Figure 2: Detail of the rotating block (Male) with Pin to Figure 4: Assembly of fixed block on ITC-HL frame. be installed on the various stretchers. © Ferno Washington Italia. Rel.010916... - Page 9 ITC - Retaining system for incubator Figure 5: Assembly of rotating block on stretcher. Figure 6 Detail of safety pin to be removed when ITC-HL frame is to be separated from the stretcher Figure 7: Coupling of fixed and rotating blocks with safety pin.
- Page 10 ITC-HL frame and the stretcher together (see figure 6 and figure 7), open the four lifting handles (see figure 8), and lift the ITC-HL frame with the incubator, keeping it parallel to the ground. Always put the handles back in the starting position when connecting the system to the stretcher again, as shown in figure 9.
- Page 11 ON FERNO 5126 / 5126EL STRETCHER Warning: to assemble the ITC-HL system on 5126 series stretchers, make a slot in the ABS central panel with a cutter or small saw in order to fix the relevant blocks onto the frame, as shown by the two RED arrows in figure 13.
- Page 12 INSTALLATION OF ITC-HL FRAME ON FERNO 35A AND 36 PROFLEXX STRETCHER Warning: to ensure interchangeability of the ITC-HL system with other Ferno stretchers, remove the mobile backrest on the stretcher. Figure 14: Installation of ITC-HL frame on Ferno 35A Stretcher.
- Page 13 INSTALLATION OF ITC-HL FRAME ON FERNO 26S - 26 B STRETCHER Warning: to ensure interchangeability of the ITC-HL system with other Ferno stretchers, remove the mobile backrest on the stretcher. Figure 16: Installation of ITC-HL frame on Ferno 26 P - 26 B Stretcher.
- Page 14 INSTALLATION OF ITC-HL FRAME ON FERNO MONDIAL WITH SMALL STRETCHER AND MONDIAL MONOBLOC STRETCHER Warning: to ensure interchangeability of the ITC-HL system with other Ferno stretchers it may be necessary to remove the mobile backrest on the stretcher. Coupling of fixed and rotating blocks with safety pin for Mondial Figure 17: Installation of ITC-HL frame on Ferno Mondial Monobloc Stretcher ©...
- Page 15 ITC - Retaining system for incubator INSTALLATION OF ITC-HL FRAME ON FERNO IN/X STRETCHER Coupling of fixed and rotating blocks with safety pin for Mondial monobloc and IN/x © Ferno Washington Italia. Rel.010916...
- Page 16 ITC - Retaining system for incubator INSTALLATION OF ITC-HL FRAME ON FERNO INTRA-HOSPITAL TRANSPORTER 147 Warning: to ensure interchangeability of the ITC-HL system with other Ferno stretchers, remove the mobile backrest on the stretcher. © Ferno Washington Italia. Rel.010916...
- Page 17 • Check that all anchoring blocks are securely fixed to the ITC-HL and stretcher frames. • Check that the incubator is securely fixed to the ITC-HL frame and that all fastening screws are present. • Check that the safety pins are present and correctly inserted in the relevant seats.
-
Page 18: Maintenance
* ROUTINE maintenance: the stretcher has to be subjected use of the locking device and immediately contact Ferno's to a routine maintenance intervention once a year by Ferno Technical Support Service to request repairs or maintenance. skilled technicians. -
Page 19: Technical Support Service
Ferno's products are guaranteed against manufacturing from Ferno Washington Italia s.r.l., and the shipping costs defects for a period of 24 months from the date on the Ferno are not covered by this warranty. Ferno Washington Italia Washington Italia s.r.l. shipping document. -
Page 20: Limitation Of Liability
Warranty Limitation of liability Warranty claims If a product is found to be defective, Ferno Washington Italia Contact Ferno's Customer Service immediately if you receive s.r.l. will repair and replace it, or, at our own discretion, a product that is suspected to be defective. A representative refund the purchase price. - Page 21 Rel.010916 English (UK) Ferno Washington Italia s.r.l. Via Benedetto Zallone 26 40066 - Pieve di Cento (BO) - ITALY Telephone (toll-free in Italy) 800.501.711 Phone +39 0516860028 +39 0516861508 E-mail info@ferno.it Website www.ferno.it © Ferno Washington Italia. Rel.010916...