Ferno Pedi-Mate+ Quick Start Manual

Download this manual

Pedi-Mate+

Quick start guide

This document serves as a quick start user guide for the correct and secure ﬁtting of the

Pedi-Mate+ to a stretcher for the safe transportation of children.

Please refer to the Pedi-Mate+ user manual for more details associated to cleaning and

storage.

Pedi-Mate+ Quick start guide October 24 v.1

Need help?

Do you have a question about the Pedi-Mate+ and is the answer not in the manual?

Page 1 Pedi-Mate+ Quick start guide This document serves as a quick start user guide for the correct and secure ﬁtting of the Pedi-Mate+ to a stretcher for the safe transportation of children. Please refer to the Pedi-Mate+ user manual for more details associated to cleaning and storage.
Page 2 Stretcher set up In order to ﬁt correctly the stretcher must have the strapping system as shown below, most importantly the loop at point B is necessary if on a Ferno Power X stretcher. Pedi-Mate+ Quick start guide October 24 v.1...
Page 3 Fitting the Pedi-Mate+ to the stretcher 1. Remove the 4-point harness restraint from the stretcher (leave all other leg straps in situ). 2. Raise the back of the stretcher to an angle between 15 and 45 degrees to keep the patients shoulders higher than the pelvis to maintain a correct centre of gravity.
Page 4 2. Fasten each of the main frame straps around the stretcher’s main frame. *Note if on a Ferno Power X stretcher, use the loop ﬁtted at point B on the stretcher to secure the main frame straps.