7' Glacial Pre-Lit Colour-Changing Tree
model no. 151-8574-6 | Toll-free number: 1-866-827-4985
IMPORTANT: Please read this manual carefully before assembly and save it for reference.
TREE ASSEMBLY INSTRUCTIONS
Set up and light up your tree in less than 10 minutes. Carefully follow the instructions below on how to quickly and easily set up your new tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. First assemble the tree stand and place on a level surface. (See Fig. A.)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 1
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section. Remove the protective cap before inserting it into the
pre-assembled stand. Before proceeding to the next step, make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) into the lower section(s) until the tree top is inserted.
Click
Tree top
S100
S100
Section 2
S100
S100
S100
S100
Swivel the legs of the stand until they snap
into position. (The legs should be evenly
spaced once this step is complete. ) Place the
tree stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
*Electrical Rating For The Tree
(For Indoor Use Only.)
Input: 120 V, 60 Hz, 0.38 A
Output: 29 V DC 0.621 A
Controller: 0.621 A
Do Not Tamper
with Internal Parts
Open the
protective
cover
Adaptor
To Be Plugged
Into Wall
Outlet
Foot Pedal
Control box
On/Off Switch
Instruction Manual
For indoor use only
Retain carton for storage purposes
Do Not Tamper
with Internal Parts
Open the
protective
cover