NOMA CANVAS 151-7108-4 Instruction Manual

7½' (2.29 M) PIEDMONT FIR TREE
.
model no 151 7108-4 -
IMPORTANT:
Please read this manual carefully before assembly and save it for reference.
Thank you for purchasing this Piedmont Fir Lighted Tree. This tree assembles in less than one minute and is decorated
with energy-saving LED light sets. For your convenience, it is equipped with an on/off foot pedal switch for easy
illumination.
This tree is pre-strung with 1000 white LED lights:
CARTON INCLUDES:
• 3 pre-lighted tree sections (A - Top, B - Middle, C - Bottom)
• 1 tree base
• 1 screw for tree base
• 1 on/off foot pedal switch with adaptor
• 1 adapter
CAUTION!
-
BEFORE ASSEMBLING OR DISASSEMBLING.
ASSEMBLY:
Note: Before you start to assemble your tree, please choose a location near an electrical wall outlet. Place the
tree stand on a level surface.
Please remove protective covers from the base of the pole from each section.
1. Unfold the tree base to a 90 degree angle.
2. Carefully insert bottom section (C) of tree into tree base and tighten the screw (see Fig. 1)
|
Toll-free number :
INSTRUCTION MANUAL
ALWAYS UNPLUG YOUR TREE FROM ITS POWER SOURCE
A
Fig. 3
B
Fig. 2
C
Fig. 1
Tree base
Retain carton for storage purposes
1-866 827-4985 -
concave
protuberance
Fig. 4
Foot pedal Foot pedal
Fig. 5
switch switch
Fig. 7
D
Fig. 6
Instruction Manual
For indoor use only
side side
view view