NOMA CANVAS CTI151-6235-6 Instruction Manual

7 ½' Indoor Appalachian Pine Tree
model no. CTI151-6235-6 | www.noma.com
IMPORTANT: Please read this manual carefully before assembly and save it for reference.
TREE ASSEMBLY INSTRUCTIONS
Carefully follow the instructions below to quickly and easily set up your tree.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet. Do not plug the adaptor into the wall
outlet until all of the below steps are completed.
2. Assemble the tree stand and place on a level surface. (See Fig. A.)
Fig. A - Tree Stand Assembly
Fig. B - Tree and Light Assembly
Section 1
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top. Start with the bottom section. Remove the protective cap before inserting it into the
assembled stand. Before proceeding to the next step, make sure the pole is firmly inserted and secured into the stand.
5. Continue by inserting the upper tree section(s) into the lower section(s) until inserting the tree top.
Click
Tree top
100S
100S
100S
100S
Section 2
100S
100S
Pull apart the legs of the stand so that they
are snapped into an X-shape, and place the
tree stand on a level surface.
To close the stand, press the metal button
and fold the legs together.
*Electrical Rating For The Tree
(For Indoor Use Only.)
Input: 120 V, 60 Hz, 0.36 A Max
Output: 29 V DC 0.6 A
Insert Red labelled
Plugs Into Red
Labelled Extension Cord
Adaptor
To Be Plugged
Into Wall
Outlet
Control
Foot Pedal
ON/OFF Switch
Instruction Manual
For indoor use only
Retain carton for storage purposes