Advertisement
Quick Links
7 ½' LIGHTED WINSTON TREE
.
model no CTI1514418
IMPORTANT:
Please read this manual carefully before assembly and save it for reference.
Thank you for purchasing this Winston Lighted Tree. This tree assembles in minutes and is decorated with energy
saving LED light sets. For your convenience, it is equipped with an on/off foot pedal switch for easy illumination.
½'
This 7
(2.3 m) tree is pre-strung with 500 lights.
CARTON INCLUDES:
• 3 pre-lighted tree sections (A - Top Section, B - Middle Section, C - Bottom Section)
• 1 sturdy metal tree stand
• 1 screw for tree stand
• 6 extra 3.0 V LED replacement bulbs
• 3 spare 3 A fuses for LED light string
• 1 spare 5 A replacement fuse for extension cord-note: fuse is already in extension cord plug; slide access panel
to open (see Fuse Replacement below)
FOR INDOOR/SEASONAL USE ONLY
CAUTION!
-
BEFORE ASSEMBLING OR DISASSEMBLING.
Please locate the plug and socket first before assembling each section of the tree.
ASSEMBLY:
Note: Before you start to assemble your tree, please choose a location near an electrical wall outlet. Place the
tree base on a level surface.
Please remove protective covers from the base of the pole from each section.
1. Carefully insert bottom section (C) of tree into tree base. Make sure pole is firmly inserted into the tree base
and screw is tightened. Insert middle section (B) of tree into bottom section (C). Insert the top section (A) into
the middle section (B) (Fig. 1, 2, 3).
2. Locate light set plug from top section (A) and plug into outlet of extension cord mounted in section B (Fig. 4).
IMPORTANT:
Any outlets you need to plug into are not wrapped in tape.
|
www.noma.com
INSTRUCTION MANUAL
ALWAYS UNPLUG YOUR TREE FROM ITS POWER SOURCE
Do not remove the tape wrapped around the outlets of the extension cord mounted in section (B).
A
Fig. 3
B
C
Fig. 2
Fig. 1
Tree stand
Retain carton for storage purposes
1
1
E
E
Fig. 4
Fig. 4
E2 E2
Fig. 5
Fig. 5
6
6
Fig.
Fig.
Fig. 7
Instruction Manual
For indoor use only
Side
Side
view
view
Advertisement
Related Manuals for NOMA CTI1514418
Summary of Contents for NOMA CTI1514418
- Page 1 For indoor use only Retain carton for storage purposes 7 ½’ LIGHTED WINSTON TREE www.noma.com model no CTI1514418 IMPORTANT: Please read this manual carefully before assembly and save it for reference. INSTRUCTION MANUAL Thank you for purchasing this Winston Lighted Tree. This tree assembles in minutes and is decorated with energy saving LED light sets.
- Page 2 3. Extension cord mounted in middle section (B) hangs freely down into bottom section (C). Position cord as near to pole as possible. 4. Locate light set plug from bottom section (C) and plug into outlet of extension cord hanging down from middle section (B) (Fig.
- Page 3 Use and care instructions a) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the bulb holders or enclosures, loose connections, or exposed copper wire. b) When storing the product, carefully remove the product from wherever it is placed to avoid any undue strain or stress on the product conductors, connections, and wires.
- Page 4 100°F (38°C). Limited 1-year Warranty This Noma product carries a one (1) year warranty against defects in workmanship and materials. Noma agrees to replace a defective product, within the stated warranty period, when returned to the place of purchase with proof of purchase.