NOMA 151-4417-6 Instruction Manual

1-PLUG 1-MINUTE
Self Shaping LED Snowfall Spruce Tree
151-4417-6
Thank you for purchasing this pre-lighted tree. This tree assembles in less than one minute and is decorated with CSA-listed
miniature light sets. For your convenience, it is equipped with a foot pedal switch for easy illumination.
This 7' tree is pre-strung with 500 lights:
CARTON INCLUDES:
3 pre-lighted tree sections (A – Top Section, B – Middle Section, C – Bottom Section)
•
1 sturdy metal tree stand
•
1 screw for tree stand
•
8 extra 3 V LED replacement bulbs
•
FOR INDOOR/SEASONAL USE ONLY
ASSEMBLY INSTRUCTIONS FOR TREE STAND
1. Place the Tree Base (D) on a level surface. Unfold the base and make sure each leg is at an even angle and
insert the screw into the hole and tighten according to the instructions.
2. The stand has a control box and a foot pedal switch. The foot pedal switch is for choosing different functions
and for easy illumination.
functions. The 2 lighting options available are
ASSEMBLY INSTRUCTIONS FOR TREE
1. Before you start to assemble the tree, choose an appropriate location near a grounded outlet.
2. Assemble the tree from the bottom to the top, according to the assembly instructions.
3. Carefully insert the bottom section (C) of the tree into the tree base vertically as illustrated in Figure 1. Rotate
the bottom section (C) right or left until it falls into place, then insert vertically and tightly into the tree base to
ensure proper circuit connection.
4. Insert the middle section (B) of the tree into the bottom section (C) vertically as illustrated in Figure 2. Rotate
the middle section (B) right or left until it falls into place, then insert vertically and tightly into the bottom section (C)
to ensure proper circuit connection.
INSTRUCTION MANUAL
This tree is colour-changing. Just press the button on the foot pedal switch to change
steady or cascading
.
1