NOMA Artificial Christmas Tree Assembly And Use Instructions

Assembly, Use and Safety Instructions for:
Please read them thoroughly before use and retain for future reference.
Thank you for purchasing this Artificial Christmas Tree from NOMA™
Please read these instructions and warnings carefully before use to ensure safe and satisfactory operation of this product.
Instructions for use
No tools required for assembly.
Before You Start
• Decide on an appropriate location for your product.
Remove all plastic bags and dispose of safely out of the reach of children & animals.
•
Please note, it is recommended that two people assemble this item.
•
How to assemble the tree and tree stand.
1. Open the stand to form an "X" shape. Ensure the hole in the stand lines up with the hole in the leg.
2. Insert the bolt & screw in– do not fully tighten the screw at this stage.
How to assemble the tree
1. Remove any protective plastic end caps from ends of the tree section and store in the storage carton.
2. Insert the bottom section of the tree into the stand. One person needs to hold the tree upright whilst the
other person tightens the bolt in the stand to hold the tree firmly in place
3. Check that the tree is upright and not leaning. If so, undo the screw & repeat the operation.
4. Assemble the tree sections together, with the widest section at the bottom and the narrowest at the top.
5. To dress the tree grasp the branch near the tree trunk and manoeuvre into position. Then gently open up the
smaller branches to create the desired look.
6. Remember to keep any bands that were removed from the tree sections in the storage carton. They will be
reused when storing the tree.
Artificial Christmas Trees
These instructions are for your safety.
NOMA is a registered brand of Leisuregrow Products Limited, SG7 5HG