Safety Precautions - Ametek Motec MC3000B Installation And Operating Instructions Manual

Resolution
Luminous intensity
Angle of view, horizontal
Video signal
Videosystem
2

Safety precautions

The electrical connection and initial commissioning must only be performed
by a knowledgeable specialist in conformity with the instructions in these
operating instructions.
The devices must only be placed in operation if the user is aware of the risks
and dangers resulting from the use of the device.
Damaged devices must not be placed in operation.
A direct connection on the AC network is not permitted.
The fuse which has been pre-connected to the camera may not be bridged
or removed. A defective fuse must be replaced with the prescribed current
value (see the chapter: Technical Data).
H 640 x V 480 Pixel
<1 lx/F2.0
MC3000B 20°/40°/70°/90°/100°/115°/125°
MC3000B-VA 70°/90°/100°/115°
Further versions on request
FBAS/CVBS
PAL
All dimensions are in mm
EN
13