Important Information About The Product; Declaration Of Conformity; Technical Data - Ametek Motec MC3000B Installation And Operating Instructions Manual

1.1

Important information about the product

Make certain based on the information on the monitor rating plate that the device
EN
type matches these operating instructions. For further instructions, please con-
sult the operating instructions for the connected cameras or video control units.
1.2

Declaration of conformity

As the initial vendor within Europe, we have conducted an evaluation of con-
formity for our products in accordance with EU directives and legal regulations
based on the requirements of the relevant "harmonised standards". You will find
the CE mark on the product and also on the accompanying product documen-
tation. We will be happy to provide you with a separate EC Declaration of Con-
formity upon request. If modifications are made to the device, compliance with
the requirements of conformity is no longer ensured and the warranty becomes
void. In case of use outside the EU, the user is required to comply with relevant
national requirements.
1.3

Technical data

Power supply
Power consumption
Operating temperature
Storage temperature
Weight
Housing
Degree of protection
Mechanical stress
Image sensor
12
9 V...32 V DC
Max. 3 W (incl. heating)
-60 °C...+85 °C
-60 °C...+85 °C
MC3000B 0.4 kg/MC3000B-VA 1.1 kg
MC3000B aluminum
MC3000B-VA stainless steel (V4A), glass
bead blasted
Resistant to immersion in water and high-
pressure cleaners (IP68 and IP69K) in ac-
cordance with ISO 20653 and IEC 60529
Shock-proof up to 50 g, shake-proof up to
5 g in accordance with DIN EN 60068
MT9V128, CMOS 1/4"
anodized, black/